Tag Archives: 48-port PoE switch

Buy PoE Switch: 48-Port Switch vs 2 24-Port Switches

When we have about 30 PoE and non-PoE mixed connections in our network, the problem of buying a 48-port PoE switch vs. 2 x 24-port PoE switch always puzzles us. If we already have one 24-port PoE switch in use and we’re just adding more ports, we can choose to buy a single 16-24 ports PoE switch or a 16-24 ports Ethernet access switch to connect the increased devices. But as for a newly built network or 30 newly-deployed PoE devices, we have to balance the pros and cons of choosing one 48-port switch vs. 2 24-port switches.

48-Port Switch vs 2 24-Port Switch

PoE Connectivity: 48-Port Switch vs. 2 24-Port Switch Debate

In terms of the cost, usually one 48-port PoE switch will cost more than two 24-port PoE switches of the same model, but it does not mean always. For example, buying the 48-port PoE+ managed switch FS S1600-48T4S is lower than buying two 24-port PoE+ managed switches FS S1600-24T4F. If we have a tight budget and concerns cost saving most, the 1 x 48-port switch vs. 2 24-port switch debate can end here by buying the cheaper choice. Otherwise, we have more factors to consider.

Concerns of Installing 2 x 24 Port PoE Switch

In the options of one 48-port switch vs. 2 24 port switches, if we choose to do the job with two 24-port PoE switches, then we may have to undertake these shortcomings, unless they do not matter in our case. Firstly, two 24-port PoE switches take up more space than a 48-port PoE switch. A fixed-chassis 48-port PoE switch takes up a standard 1 RU space of the rack while 2 x 24-port PoE switch will use more space than that whether it is the 1RU size or smaller. Secondly, if the 2 x 24-port PoE switches are not stacked then we have to do trunk between those two switches, which will eat up ports and give you only 46 ports available. At the same time, it provides an additional potential of bottleneck at the uplink port. Since the internal traffic on a switch is going to be gazillions of times faster than a 1G or even a 10G uplink between switches. But for a 48-port one, it will have fewer issues with bottleneck/congestion. The last concern is that two 24-port PoE switches are harder to manage than one 48-Port PoE switch, even when stacking the two.

Concerns of Installing 1 x 48 Port PoE Switch

When we decided to install only one 48-port switch versus 2 x 24-port switch, there are also some concerns in practice. The biggest issue is that we lose redundancy. If we have only one switch and it fails, we’re chained until we get the replacement, which could be over 24hrs away. But in a two switches’ scenario, if one switch fails at least half of our devices can still be up and running. Another thing we may lose is the separate placing of the 2 x 24-port switches. If we have a single rack to install them, then there’s no issue but if we want to place desktop switch for IP cameras and IP access points in different offices, we may not go with a 48-port PoE switch.

Suggestions for Selection

After the discussion about 48-port switch vs. 2 24-port switches, here are the conclusions we have. In terms of better performance, the 48-port PoE switch is over 2 x 24-port switch. There’s less possibility of creating congestion between the two switches at the uplink ports. For easier management of the devices, it is also suggested to go with one single 48-port PoE switch rather than 2 x 24-ports. All ports on the 48-port PoE switch could communicate between them at wire speed. When we need the redundancy, we’d better go with 2 x 24-port PoE switch. If we want to avoid some problems brought by trunking and separate managing, we can choose stackable PoE switches or modular switch with two 24-port modules, which will provide large backplane and can be managed as a whole.

Ending

The concerns that we discuss in this post are general ones that we may have in choosing one 48-port switch vs. 2 24-port switches for PoE devices. The final decision should depend on our key purpose of buying them. The above factors are several things that we can take into account when we face the similar issue.

Related article: How to Choose a Suitable 48-Port PoE Switch?

Comparison of 48 Port PoE Switch Price and Functionality

When it comes to connecting a lot of VoIP phones and IP cameras, a 48 port PoE switch is great for powering them. Whether it is for home use or business use, a 48 port PoE switch can best solve the problems of installing these PoE network devices in places that have no power lines. If you need to know the application of 48 port PoE switch in access and core area, you could read Deploying 48-Port Gigabit PoE Managed Switch in Different Networks. Due to the high capacity and power supply feature, a 48 port PoE switch price is often higher than a standard 48-port Ethernet switch with no PoE. In this post, we will introduce some cheap 48 port PoE switches and do a comparison between them.

48-port PoE switch for VoIP phone IP camera

Comparison of Four 48 Port PoE Switch Price and Function

The four 48 port PoE switches that we’re going to discuss are UniFi US-48-500W, TP-Link T1600G-52PS, D-Link DGS-1210-52MP/ME and FS S1600-48T4S. They are inexpensive compared with most enterprise class 48 port PoE switches. Let’s have a look at these switches.

Difference Between the Four 48 Port PoE Switches

The table below gives some basic parameters of these four switches, including the port type, supported data rate, the maximum PoE power consumption, switching capacity and forwarding rate.

Switch Model UniFi US-48-500W TP-Link T1600G-52PS D-Link DGS-1210-52MP/ME FS S1600-48T4S
10/100/1000Mbps RJ45 Ports 48 48 48 48
Gigabit SFP Ports 2 4 4 0
SFP+ Ports 2 0 0 4
Max. PoE Power Consumption 500 W 470.4 W 479.5 W 600 W
Max. Power Per Port (PoE+) 30 W 30 W 30 W (ports 1-8) 30 W
Switching Capacity 140 Gbps 104 Gbps 104 Gbps 180 Gbps
Forwarding Rate 104.16 Mpps 77.4 Mpps 77.4 Mpps 130.94 Mpps
Price US$760.00 to US$1,230.90 US$481.99 to US$725.99 US$988.06 to US$1,028.01 US$689.00

The UniFi US-48-500W is a 48-port Layer 2 access switch. In addition to 48 Gigabit RJ45 ports, it has 2 fiber ports of Gigabit SFP and 2 fiber ports of 10G SFP+. It has a non-blocking throughout of 70 Gbps, which is sufficient for typical home use and most small business use. But compared with the other three 48-port PoE switches, it lacks some Layer 3 features. The other three are Layer 2+ switches that support static routing and access resolution protocol (ARP) inspecting, which are simple but efficient approaches in segmenting and securing the network.

Outwardly, the TP-Link T1600G-52PS and D-Link DGS-1210-52MP/ME are similar in many aspects. They both have 4 Gigabit SFP ports and their switch fabric capacity and forwarding rate are identical. However, the 48 RJ45 ports of T1600G-52PS are all IEEE 802.3at/af-compliant PoE+ ports, while the 48 RJ45 ports of DGS-1210-52MP/ME are not. Only ports 1-8 are PoE+ and the ports 9-48 are PoE. The price of T1600G-52PS is much lower than DGS-1210-52PS but the former one is released in 2015 while the latter one is 2017’s new model. Both T1600G-52PS and DGS-121052MP/ME has no 10G ability.

Obviously the switching capacity (or backplane bandwidth) and forwarding rate of the FS S1600-48T4S are the highest among these four switches. It has four 10G uplink ports, which allows large traffic from the access switch to the core switch and ensures high speed and precise transmission and recording without delay. Meanwhile, it supports the largest power to the device, which is suitable for connecting more PoE network devices. This 48 port PoE switch price is lower than two of the other switches.

48-Port PoE Switch Price

Common Benefits and Features of the Four 48-Port PoE Switches

These four 48 port PoE switch price are much lower than that of high-end PoE switches. They are all managed PoE switches equipped with 48 10/100/1000Mbps Rj45 ports of auto-sensing IEEE 802.3af (PoE), which provides a maximum per PoE port output power to each device of 15.4 W. They also support IEEE 802.3at (PoE+), which enhanced the max. per port power consumption to 30 W. All of them have been equipped with fiber uplink ports.

Another common feature is that these four 48 port PoE switches all support easy management. And the managing function is not limited to only one type. They all have an RJ45 console port or a serial port for managing through web-based graphical user interface (GUI, IPv4/IPv6) or command line interface (CLI).

Summary

This post has compared the 48 port PoE switch price and function. They are generally inexpensive and suitable for both home use and business use. The managing functions are simplified compared with high-end switches, in order to help better management of the network. If you want 10G uplink, UniFi US-48-500W or FS S1600-48T4S are recommended. Before purchasing a 48 port PoE switch, be sure to check the power requirement for your total PoE devices, the standard it complies to and the overall PoE budget of your installation.

Related Article: Deploying 48-Port Gigabit PoE Managed Switch in Different Networks