Tag Archives: J4859C

Fiberstore Compatible 1000BASE-LX/LH SFP modules

1000BASE-LX/LH was standardized six years after the initial gigabit fibre versions as part of the Ethernet in the First Mile task group. It is very similar to 1000BASE-LX, but achieves longer distances up to 10 km over a pair of single-mode fibre due to higher quality optics. The 1000BASE-LX/LH SFP module, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fibre-optic link spans of up to 10 km and up to 550 m on any multimode fibres. Duplex LC/PC connector.

1000BASE-LX/LH SFP

Features

  • Compliant with SFP MSA standard
  • Compliant with IEEE 802.3z
  • +3.3V single power supply and TTL Logic Interface
  • 10km with 9/125 µm SMF
  • 1310nm FP laser and PIN photodetector for 10km transmission
  • Hot-pluggable SFP footprint duplex LC connector Interface
  • Class 1 FDA and IEC60825-1 Laser Safety Compliant
  • Duplex LC connector
  • Compliant with SFF-8472
  • ROHS compliant
  • Average Output Power:-9~ -3dBm
  • Receiver Sensitivity:-21dBm

Applications

  • 1000BASE-LX/LH Ethernet
  • Data storage networks

Fiberstore 1000Base-LX/LH SFP module over single-mode fibre, which is a high performance and cost effective transceiver. It is designed to meet Gigabit Ethernet (1000Base) application. The transceiver consists two sections: the transmitter section consists of a high reliability 1310nm FP LD with monitor photo detector (MPD) in eye safety; the receiver section consists of a high-speed InGaAs PIN photodiode (PD) and trans-impedance preamplifier. The output of the PD drives the post-amplification, quantizing, and optical signal detection circuits. The receiver is built in the LOS monitoring function. For further information, please see SFP MSA and SFF-8472 standard.

With plenty experience in interoperability with 3rd party standard based network equipment such as Cisco, HP, Juniper, Netgear, 3 Com, Alcatel-Lucent, D-LINK, Extreme, and HuaWei, Fiberstore’s fibre optic transceiver are able to fulfill enterprises, service providers, telecom operators and SAN providers to build and fulfill their existing and future network expansions.

Compatible Fibre Optic Transceiver List

Brand Model Description
Brocade E1MG-LX-OM 1000BASE-LX SFP SMF 1310nm 10km LC DDM
Cisco GLC-LH-SM 1000BASE-LX/LH SFP SMF 1310nm 10km LC
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP SMF 1310nm 10km LC EXT DDM
Dell 320-2879 1000BASE-LX SFP SMF 1310nm 10km LC DDM
Extreme Extreme 10052 1000BASE-LX SFP SMF 1310nm 10km LC DDM
HP JD119B 1000BASE-LX SFP SMF 1310nm 10km LC DDM
HP J4859C 1000BASE-LX SFP SMF 1310nm 10km LC DDM
Juniper EX-SFP-1GE-LX 1000BASE-LX SFP SMF 1310nm 10km LC DDM
Juniper JX-SFP-1GE-LX 1000BASE-LX SFP SMF 1310nm 10km LC DDM
Netgear AGM732F 1000BASE-LX SFP SMF 1310nm 10km LC DDM

To save more money, We suggest that compatible 3rd transceiver modules may be another good choice however, you should make sure that your vendor is reliable. Fiberstore’s SFP transceivers are 100% compatible with major brands, they are backed by a lifetime warranty so that you can buy with confidence. Additionally, customize SFP transceivers to fit your specific requirements are available. If you have any requirement of transceivers, Fiberstore will be a good choice for you.

Some Knowldege About HP ProCurve Mini-GBICs and SFPs

About HP ProCurve

HP ProCurve was the name of the networking division of Hewlett-Packard from 1998 to 2010 and associated with the products that it sold. The name of the division was changed to HP Networking (also called HP ProCurve Networking) in September 2010 after HP bought 3Com Corporation. As the then-ProCurve division began to offer LAN switches, Core, Datacentre, Distribution, Edge, Web managed and Unmanaged Switches. The ProCurve was also used with Network Management, Routing and Security products. HP ProCurve transceivers as the part of its networking accessories that are applied to their corresponding switches or routers. Today, we will introduce some knowledge of the HP GBICs and SFPs.

Products Involved In This Paper

HP ProCurve Gigabit-SX-LC Mini-GBIC (Product No. J4858A/J4858B/J4858C)

A small form-factor pluggable (SFP) Gigabit SX transceiver with LC port that provides a full-duplex Gigabit solution up to 550 m on multimode fibre.

HP gbics-J4858C

FS.COM:

  • NEW HP J4858A X121 Compatible 1000BASE-SX SFP 850nm 550m Transceiver Module
  • NEW HP J4858B X121 Compatible 1000BASE-SX SFP 850nm 550m Transceiver Module
  • NEW HP J4858C X121 Compatible 1000BASE-SX SFP 850nm 550m Transceiver Module

HP ProCurve Gigabit-LX-LC Mini-GBIC (Product No. J4859A/J4859B/J4859C)

An SFP format gigabit transceiver with LC connectors using LX technology.

J4859C

FS.COM:

  • NEW HP J4859A Compatible 1000BASE-LX SFP 1310nm 10km Transceiver Module
  • NEW HP J4859B Compatible 1000BASE-LX SFP 1310nm 10km Transceiver Module
  • NEW HP J4859C Compatible 1000BASE-LX SFP 1310nm 10km Transceiver Module

HP ProCurve Gigabit-LH-LC Mini-GBIC (Product No. J4860A/J4860B/J4860C)

A small form-factor pluggable (SFP) Gigabit LH transceiver that provides a full-duplex Gigabit solution up to 70 km on single-mode fibre.

J4860C

FS.COM:

  • NEW HP J4860A Compatible 1000BASE-ZX SFP 1550nm 80km Transceiver Module
  • NEW HP J4860B Compatible 1000BASE-ZX SFP 1550nm 80km Transceiver Module
  • NEW HP J4860C Compatible 1000BASE-ZX SFP 1550nm 80km Transceiver Module

Knowledge You Should Know About HP GBICs and SFPs

For the above products, there usually are many questions about them. The following infomation will make you to know more about them.

Supported Platform

According to HP ProCurve Networking Mini-GBIC Support Matrix, we can easily find out which HP GBICs and SFPs are supported on which ProCurve Systems. General rules are:

  • Please use only genuine or high-quality 100% compatible ProCurve Mini-GBICs and SFPs on ProCurve System.
  • Newer ProCurve products require revision “B” or later Mini-GBICs and SFPs (product number ends with the letter “B” or later, for example J4858B, J4859C).

Some-Compatible-Systems-1024x378

About the Version A, B, C

HP GBICs and SFPs have three version, but you may not find A and B anymore in HP’s official website. In fact, the version A, B and C are the development of HP ProCurve Mini-GBIC and SFP. Though there is no big difference between these three version, some improvement will be added in the newest version, and the supported platforms adjustment. The “revision C” Mini-GBICs (eg. J4858C, J4859C, J4860C) are supported in all ProCurve products that support Mini-GBICs. In addition, “revision B” and “revision C” mini-GBICs can be used together in any ProCurve switch that supports mini-GBICs. Actually, as the transitional products, HP stops offering the version A and version B. But version C are not supported on some old switches, thus, some users have still used the version A or version B. FS.COM can support the 100% compatible HP ProCurve Mini-GBICs and SFPs at version A, B and C, such as J4858A/B/C, J4859A/B/C, J4860A/B/C.

Mini-GBICs and SFPs hot-swappable

All ProCurve Mini-GBICs and SFPs are hot-swappable (they can be installed and removed while the switch is powered on). However, the network cable should be disconnected before removing the HP GBICs or SFPs from the switch.

Best practice tip: After inserting a transceiver into a ProCurve switch, the Mode LED will come on for two seconds while the transceiver is initialized. Do not remove the transceiver until the Mode LED has turned off. For the Switch 2600 and 2800 Series: After inserting a transceiver into a 2600 or 2800 switch, the “M” LED will come on to indicate that the mini-GBIC slot is active. Wait at least two seconds after the “M” LED comes on if you need to remove the transceiver.

Conclusion

FS.COM is a professional manufacturer and supplier of optical networking solutions. We can supply 100% compatible fibre optic transceiver of many brands, like HP, Cisco, Dell, D-link etc. with a incredible discount. About HP, you can find a full product line of our New HP transceivers with a good price and enjoy same-day shipping. In addition, according to your requirements, we welcome any inquiry for customized fibre optical transceiver. FS.COM’s aim is offering the best quality products and perfect solutions, saving customers’s time and money, making customers enjoy personalisation.

Related Article: